WS500 Victron Crossover Cable
$19.95
WakeSpeed WS500 RJ45 to Victron Energy RJ45 VE-CAN crossover cable
2 in stock (can be backordered)
Wakespeed WS500 RJ45 to Victron Energy RJ45 VE-CAN crossover cable 4.5M length (15′)
April 2021: Now includes 1 Terminator
| Weight | 0.2 kg |
|---|---|
| Dimensions | 20 × 20 × 5 cm |
1 review for WS500 Victron Crossover Cable
Related products
-
Sale!
WS500 Smart Regulator
From: $499.95Select optionsBonus !! Buy One and get the WS500 configuration Tool Free, a $ 24.95 value!
Buy two and get the Pro version Free,
a $ 149.95 value!
And if you build it as a kit you save 10% on all accessories !!
(versus ordering items individually)
The WS500 is a next generation Smart Regulator for Marine, Off-grid and RV applications. It is ideally suited to the latest in battery technology and includes CANBus and NMEA2k communications to integrate into an overall Energy Management Network. Select your Wiring harness based on whether you need positive or negative type alternator excitation. You WILL need either a Positive or Negative Wiring Harness. Make sure you include it when you buy. You may also wish to include a battery temperature sensor wiring harness. This is optional but is strongly recommended, especially in “Battery Centric” configurations where the WS500 can reduce its output when your battery starts to warm up.
Scroll down to select your options:
-
Engine Gateway YDEG-04
$189.00Select optionsGateway for Volvo Penta, BRP Rotax, SmartCraft (Mercury, Mercruiser) and J1939 engines to NMEA 2000 marine electronics network. It will provide you with engine revolutions, motor hours, coolant temperature, battery voltage, warning and alarms, fuel rate and other data on the screen of your chart plotter. No extra cables required in most cases thanks to a built-in Y-connector.
-
WS500 Wiring Harness
$69.95Select optionsWiring harness for WS500 alternator regulator. Includes branches for alternator, panel and battery. Select which configuration you need, either P(Positive excitation) or N(Negative Excitation)Regulators as field windings have two possible field polarities. See detailed description and Product images to help you determine your configuration.
Recent forum posts
Peter Levick (verified owner) –
One important thing to know about this cable: It is unidirectional, meaning, the blue end MUST connect to the Victron equipment and the black end must connect to the WS500. If it is backwards, the WS500 will never see CAN bus messages from the REC-BMS.