WS500 Regulator Harness (P-type) with M12 CAN connector. Includes Alt. Temp. Sensor
1 in stock (can be backordered)
This WS500 harness includes both the alternator temperature as well as a pre-wired NMEA2000 M12 connector for direct connection to your N2K network.
|Dimensions||25 × 25 × 10 cm|
You may also like…
WS500 Smart RegulatorFrom:
Bonus !! Buy One and get the WS500 configuration Tool Free, a $ 24.95 value!
Buy two and get the Pro version Free,
a $ 149.95 value!
And if you build it as a kit you save 10% on all accessories !!
(versus ordering items individually)
The WS500 is a next generation Smart Regulator for Marine, Off-grid and RV applications. It is ideally suited to the latest in battery technology and includes CANBus and NMEA2k communications to integrate into an overall Energy Management Network. Select your Wiring harness based on whether you need positive or negative type alternator excitation. You WILL need either a Positive or Negative Wiring Harness. Make sure you include it when you buy. You may also wish to include a battery temperature sensor wiring harness. This is optional but is strongly recommended, especially in “Battery Centric” configurations where the WS500 can reduce its output when your battery starts to warm up.
Scroll down to select your options:
USB Configuration Cable for Version 2.0 boards – 6 ft$14.95Add to cart
The version 2 board of the WS500 now utilizes a printer style USB port instead of the original Samsung style port, which is much more robust. The WS500 Alternator can be connected to a Windows PC via a USB printer-style cable for configuration firmware upgrades. Most commercial cables can be used but, for convenience, we …
WS500-LT-K 25 ft Battery Temperature Sensor Cable$49.95Add to cart
Long length (8 meter) (25 ft) Temperature Sensor Kit. May be used for either Alternator or Battery Temperature sensor. Custom length cables are no longer stocked and will require a special order. Contact us if needed.
WS500-BT-K 10 ft Battery Temperature Sensor Cable$39.95Add to cart
3 meter (10 ft) cable with 2-wire waterproof connector (attaches to regulator wiring harness) and tinned temp-sensor lug. In retail packaging with hang tag. Custom length cables are no longer stocked and will require a special order. Contact us if needed.
WS500 Configuration Tool-Config Version Life Time- Windows$24.95Add to cart
WS500 Smart Regulator Configuration Tool, Configure Version April 19, 2021 New Version 1.2.2 includes support for firmware level 2.4.1 just released by Wakespeed!! Not sure which version you need? Here’s a quick overview: If you want to be able to view your system operating parameters in real time and edit your profile, adjust regulator settings …