WS500 Regulator Harness (P-type) for Van Installations
WS500 Regulator Harness (P-type) for van or RV conversions. Includes Alt. Temp. Sensor.
Use this harness for applications where you want to mount the WS500 near your battery pack and away from the engine compartment.
Wiring harness for WS500 alternator regulator optimized for RV (Van) installations Includes battery/BMS/CAN connections with extended length Ignition and alternator legs. Supports P-Type alternator. Alternator Temperature Sensor included
|Dimensions||30 × 30 × 15 cm|
You may also like…
WS500 Smart RegulatorFrom:
Bonus !! Buy One and get the WS500 configuration Tool Free, a $ 24.95 value!
Buy two and get the Pro version Free,
a $ 149.95 value!
And if you build it as a kit you save 10% on all accessories !!
(versus ordering items individually)
The WS500 is a next generation Smart Regulator for Marine, Off-grid and RV applications. It is ideally suited to the latest in battery technology and includes CANBus and NMEA2k communications to integrate into an overall Energy Management Network. Select your Wiring harness based on whether you need positive or negative type alternator excitation. You WILL need either a Positive or Negative Wiring Harness. Make sure you include it when you buy. You may also wish to include a battery temperature sensor wiring harness. This is optional but is strongly recommended, especially in “Battery Centric” configurations where the WS500 can reduce its output when your battery starts to warm up.
Scroll down to select your options:
WS500-BT-K Battery Temperature Sensor Cable$39.95 – $64.95Select options
Fifteen-foot tinned cable with 2-wire waterproof connector (attaches to regulator wiring harness) and tinned temp-sensor lug. This sensor can be added for battery centric configurations where you want to monitor the battery bank temperature and use the signal to reduce the output of the alternator. These parameters can all be set in the regulator using the configuration tool.
WS500 Software “Free Upgrade” V 1.2.2Add to cart
April 19, 2021 New Version 1.2.2 includes support for firmware level 2.4.1 just released by Wakespeed!! To upgrade simply : 1) Using Windows “Add/Remove Programs” find WS500_Smart Regulator App in the list and Uninstall it. Alternatively, right click on the WS500_Tool item from your Start list and select “Uninstall“ 2) After purchasing the product for …
WS500 Configuration Tool-Pro Version Life Time- Windows$149.95Add to cart
WS500 Smart Regulator Configuration Tool, Pro Version
April 6, 2020 New Version 1.2.0 includes support for firmware level 2.2.0 just released by Wakespeed!!
This purchase is valid for 2 installations.
This tool works in conjunction with the WS500 regulator to provide monitoring, configuration, programming, and troubleshooting functions depending on the version you purchase. For more detail watch video by clicking the red arrow in top corner of the product image.