WS500 Network Connector Caps
|Threaded 19mm Cap for WS500 RJ45 CAN connector jacks. Pair|
10 in stock (can be backordered)
These 19mm plastic caps can used to protect your unused CANBus RJ45 connectors on the WS500
(Set of two caps)
|Dimensions||5 × 5 × 5 cm|
WS500 Smart RegulatorFrom:
Bonus !! Buy One and get the WS500 configuration Tool Free, a $ 24.95 value!
Buy two and get the Pro version Free,
a $ 149.95 value!
And if you build it as a kit you save 10% on all accessories !!
(versus ordering items individually)
The WS500 is a next generation Smart Regulator for Marine, Off-grid and RV applications. It is ideally suited to the latest in battery technology and includes CANBus and NMEA2k communications to integrate into an overall Energy Management Network. Select your Wiring harness based on whether you need positive or negative type alternator excitation. You WILL need either a Positive or Negative Wiring Harness. Make sure you include it when you buy. You may also wish to include a battery temperature sensor wiring harness. This is optional but is strongly recommended, especially in “Battery Centric” configurations where the WS500 can reduce its output when your battery starts to warm up.
Scroll down to select your options:
3kW DC-DC Energy Management System
• Charge higher voltage batteries utilizing existing chassis electrical system.
• On demand supplemental chassis electrical system power to support surge loads without
cost of additional batteries.
• Replace existing chassis alternator with higher energy unit and transparently support legacy
chassis power bus.
• J1939/RV-C based CAN support for system and BMS integration.
• Compatible with additional WS500 controlled alternators installed in same system
WS500 Wiring Harness-High Current$94.95Select options
High-Current variant of WS500/NH, includes additional 2nd set of Alt+, Alt- and Field wires. Alternator Temperature Sensor included.. Alternator Temperature Sensor included.
Wiring harness for WS500 alternator regulator. Includes branches for alternator, panel and battery. Select which configuration you need, either P(Positive excitation) or N(Negative Excitation)Regulators as field windings have two possible field polarities. See detailed description and Product images to help you determine your configuration.