WS500 Lithionics CAN/BMS Adapter Cable
1 in stock (can be backordered)
Adapter cable to connect to Lithionics branded battery/BMS CAN ports. Use with WS500/PH-CAN or WS500/VAN-CAN harness. Use 1x per Lihtionics BMS/Battery, along with terminator
|Dimensions||15 × 15 × 5 cm|
WS500 Regulator Harness (P-type) with CAN high/low wires$89.95Add to cart
WS500 Regulator Harness (P-type) with CAN high/low wires. Includes Alt. Temp. Sensor. Use this harness for applications where you want to tie into an existing CANBus network using the hi/lo wires only and not have to use the onboard RJ45 cable connectors in the WS500 itself. Note: CANBus is still available to the WS500 via …
WS100 To Ford Female Cable Connector$19.95Add to cart
This handy pigtail makes it possible to connect the WS100 Voltage Regulator to an existing regulator cable commonly used in existing regulator installations. Perfect for taking advantage of the WS100 regulator as an inexpensive replacement for other multi-stage voltage regulators.
WS500 Smart RegulatorFrom:
Bonus !! Buy One and get the WS500 configuration Tool Free, a $ 24.95 value!
Buy two and get the Pro version Free,
a $ 149.95 value!
And if you build it as a kit you save 10% on all accessories !!
(versus ordering items individually)
The WS500 is a next generation Smart Regulator for Marine, Off-grid and RV applications. It is ideally suited to the latest in battery technology and includes CANBus and NMEA2k communications to integrate into an overall Energy Management Network. Select your Wiring harness based on whether you need positive or negative type alternator excitation. You WILL need either a Positive or Negative Wiring Harness. Make sure you include it when you buy. You may also wish to include a battery temperature sensor wiring harness. This is optional but is strongly recommended, especially in “Battery Centric” configurations where the WS500 can reduce its output when your battery starts to warm up.
Scroll down to select your options: