Tyco IHV200HAANA BMS Contactor 12-24VDC 200A
$79.95
28 in stock (can be backordered)
The little brother to the Tyco TE EV Series this is a budget contactor designed for smaller battery packs.
Includes small aux. contact for status monitoring or system interlocks. (Not required for use with your REC BMS)
IHV200 High Voltage DC Contactors
•Designed to be the smallest, lightest weight, lowest cost sealed
contactor in the industry with the high current rating (carrying up to 200A continuous, and 500A bursts when used with oversized wiring)
•Built-in coil economizer — only 1.7W hold power @ 12VDC and it limits
back EMF to 0V. Models requiring external economizer also available
•Optional auxiliary contact for easy monitoring of power contact position
•Hermetically sealed— intrinsically safe, operates in explosive/harsh
environments with no oxidation or contamination of coil or contacts,
during long periods of non-operation
•Designed according to AIAG QS9000
•RoHS and REACH compliance
| Weight | 0.5 kg |
|---|---|
| Dimensions | 5 × 5 × 10 cm |
| Coil Voltage | 9-36V |
Product Downloads
Related products
-
WS500 Configuration Tool-Config Version Life Time- Windows
$24.95Add to cartWS500 Smart Regulator Configuration Tool, Configure Version April 19, 2021 New Version 1.2.2 includes support for firmware level 2.4.1 just released by Wakespeed!! Not sure which version you need? Here’s a quick overview: If you want to be able to view your system operating parameters in real time and edit your profile, adjust regulator settings …
WS500 Configuration Tool-Config Version Life Time- WindowsRead More
-
WS500 Wiring Harness
$79.95Select optionsWiring harness for WS500 alternator regulator. Includes branches for alternator, panel and battery. Select which configuration you need, either P(Positive excitation) or N(Negative Excitation)Regulators as field windings have two possible field polarities. See detailed description and Product images to help you determine your configuration.
-
REC Active BMS
From: $329.95Select optionsActive BMS for 12V Systems. WS500 compatible. Be sure to include the custom wiring harness with cell &
relay wires, CAN and RS485 cables, temp. sensor wires (2), and remote ON/OFF switch, unless you are just replacing a unit or doing a custom installation.
Recent forum posts
Reviews
There are no reviews yet.