Tyco EV200ADANA BMS Contactor 48VDC
Typical EV200 applications include battery switching and back-up, DC voltage power control, circuit protection and safety (36-95V coil)
11 in stock (can be backordered)
Designed to be the smallest,lightest weight, lowest cost sealed contactor in the industry with its current rating (500+A carry, 2000Ainterrupt at 320VDC).Built-in coil economizer – only1.7W hold power @ 48 VDC (36-95V operation) and it limits back EMF to 0V. Models requiring external economizer also available. Optional auxiliary contact for easy monitoring of power contact position.Hermetically sealed – intrinsically safe, operates in explosive/harsh environments with no oxidation or contamination of coils or contacts,including long periods of non-operation.Versatile coil/power connections.CE marked for EC applications. AIAG QS9000 designed, built and approved.
|Dimensions||5 × 5 × 10 cm|
REC Q Series Current Sensor pigtail$19.95Add to cart
The REC Q and SI series have custom cable connectors for the temperature and current sensors. This harness gives you the connector, with a pigtail to connect your current shunt. Use it in conjunction with the Q Series battery temp sensor
REC Wi-Fi module$209.00Add to cart
New Product, available April 2021
Wi-Fi module for REC BMS allows you to control your power on your favourite device using Wi-Fi network. Battery pack parameters such as voltages, current, temperatures, state of charge (SOC) and state of health (SOH) are displayed. It allows BMS settings and parameters setup, also used for BMS firmware updates. It fully substitutes PC Software BMS Master Control or BLE module. As an addition LCD touch display for REC BMS can also be used at the same time as an extension to the system design.