Rudder Adapter YDRA-01
The NMEA 2000 Rudder Angle Adapter YDRA-01 allows you to connect an existing resistive type rudder angle sensor installed on a rudder and supply NMEA 2000 autopilots, chart plotters and other devices with the rudder angle. Can be used with a rudder angle sensor with maximal resistance less than 400 Ohm, including EU or US standard sensors, and with 0-5V voltage output sensors. The Adapter can work in parallel with an existing analog gauge.
The NMEA 2000 Rudder Angle Adapter YDRA-01 allows you to connect an existing resistive type rudder angle sensor installed on a rudder and supply NMEA 2000 autopilots, chart plotters and other devices with the rudder angle.
The Device can be used with a rudder angle sensor with maximal resistance less than 400 Ohm, including European (10 to 180 Ohm range) or American (240 to 33 Ohm range) standard sensors, and with 0-5V voltage output sensors.
The Adapter can be installed as a standalone measuring device, or work together with a digital gauge, or in parallel with an existing analog gauge (2-coils and 1-coils gauges are supported, see Picture 2). If you have a combined gauge where you choose the value to display with a button, the Adapter will smoothly work with it, too.
NMEA2000 Micro Male, RayMarine Seatalk NG
Text Display YDTD-20
Instrument display for NMEA 2000 networks. It shows the vessel’s position, course and speed, wind and weather data, water depth, log and trip distance, engine revolutions, batteries voltage, etc. With other firmware, you can monitor up to four engines and transmissions, temperature in the exhaust system, the vessel’s trim tabs, four batteries, four diesel and four gasoline tanks and three fresh water and three black water tanks. Typical power consumption is 20 mA only.
NMEA 0183 Multiplexer YDNM-02
$149.00Add to cart
Smart multiplexer with five NMEA 0183 ports and one SeaTalk port, auto detection of port speed and easy configuration with a click of a button! And, of course, it has flexible filters, routing rules, and supports firmware updates.
The underlying idea was to create simplest multiplexer in the world. In our lab, the project was called “Simple Multiplexer”, but later we added a lot of features and removed the word “Simple”. Nonetheless, we are sure that it is still the easiest to install. Instead of a laptop and software, you’ll only need a paperclip.
The Thermometer performs measurements within the range from -55 to +125°C (-67..+257°F), the sensor is placed outside the case on a flexible, 95cm wire in a sealed stainless steel sleeve and can be used to measure the temperature of gases or liquids. If necessary, the wire can be elongated up to 100 meters. The Thermometer can be configured by the user to display data as “Air temperature”, “Sea temperature”, “Temperature in the refrigerator”, “Temperature in the engine room”, “Bait Well Temperature”, etc.