REC Victron CANBus Cable
41 in stock (can be backordered)
CAN DB9 to RJ45 (Victron Energy Pinout)
This cable connects the REC CANBus to your Victron VE.Bus, allowing it to share data for load and charging control and allows BMS data to be displayed on your Victron network using devices like the Cerbo.
As of July 1, 2021, the cable length has been increased to 3M (10 ft)
|Dimensions||15 × 15 × 4 cm|
REC SI BMSFrom: $559.95Select options
The REC SI BMS has custom profiles that integrate on the RS485 network to several well known Solar Inverters.
- Sunny Island
During the day PV powers the house and charges the battery pack. If you’re not using all the electricity that the solar PV system is generating, then the system will ensure that any surplus energy is used to charge the battery pack. Once the battery is fully charged, if there is still more solar electricity being generated, this will be exported to the grid. At time of low solar generation (night or cloudy day) the solar PV panels have a reduced or zero output, but the battery system can discharge the stored electricity, providing you with renewable-generated electricity at no additional cost. Once the battery is discharged, if you need to use more electricity, you buy it from your electricity supplier.
REC Q Series BMS 16S Slave 12VFrom: $559.95Select options
Slave unit 12V+ REC BMS Q series with integrated CAN communication protocol can manage from 4 to 16 cells (in series) used where a redundant system with several packs is required, as part of a Master/Slave configuration network. It is also compatible with Victron Cerbo installations for integration in PV systems.