REC SI BMS
The REC SI BMS has custom profiles that integrate on the RS485 network to several well known Solar Inverters.
- Sunny Island
During the day PV powers the house and charges the battery pack. If you’re not using all the electricity that the solar PV system is generating, then the system will ensure that any surplus energy is used to charge the battery pack. Once the battery is fully charged, if there is still more solar electricity being generated, this will be exported to the grid. At time of low solar generation (night or cloudy day) the solar PV panels have a reduced or zero output, but the battery system can discharge the stored electricity, providing you with renewable-generated electricity at no additional cost. Once the battery is discharged, if you need to use more electricity, you buy it from your electricity supplier.
Li-PO, LiFePO4, LiFeYPO4, LiCoO2, LiMnNiCo and LiMnO4 Lithium-Ion chemistry
compatible with variety of solar inverters: SMA Sunny Island, Victron Energy, Studer, Stecca Innotec, GoodWe, Solax, Solis, etc.
from 5 to 16 in-series connected cells per unit
single cell voltage measurement (0.1 – 5.0 V, resolution 1 mV)
single cell internal resistance measurement
single cell under/over voltage protection
SOC and SOH calculation
over temperature protection (up to 3 temperature sensors)
under temperature charging protection
passive cell balancing up to 1.3 A per cell with/without LED indication
shunt current measurement (resolution 7.8 mA @ +/- 200 A)
galvanically isolated user defined multi-purpose input/output
programmable relay (normaly open)
stand-by current consumption 2 mA
galvanically isolated RS-485 and CAN communication protocol
error LED + buzzer indicator
PC user interface for changing the settings and data-logging (optional accessory)
LCD touch display for monitoring (optional accessory)
Solar plants that fit the energy requirements of the everyday households are on the rise. Our goal is to make own power consumption of produced solar energy as high as possible. By using battery storage systems, you can increase the self-consumption level of “own-produced” energy for up to 40%. It makes us more independent from other energy sources (electrical grid) and it helps you save money on your electricity bill.
Estimated self-consumption level: 72,3%
|Dimensions||30 × 25 × 10 cm|
REC Wi-Fi module
New Product, available April 2021
Wi-Fi module for REC BMS allows you to control your power on your favourite device using Wi-Fi network. Battery pack parameters such as voltages, current, temperatures, state of charge (SOC) and state of health (SOH) are displayed. It allows BMS settings and parameters setup, also used for BMS firmware updates. It fully substitutes PC Software BMS Master Control or BLE module. As an addition LCD touch display for REC BMS can also be used at the same time as an extension to the system design.