REC Q Series BMS 16S Slave
Stand-alone unit REC BMS R and Q series with integrated CAN communication protocol can manage from 4 to 16 cells (in series). It is also compatible with Victron Cerbo installations for integration in PV systems.
REC Q BATTERY MANAGEMENT SYSTEM 16S
BMS for 24V systems, WS500 compatible. Note: The Q Series Standalone unit can be substituted if out of stock
Includes a single temperature sensor cable and current shunt pigtail with connectors
(Multiple QBMS units can be combined with the
REC Q Master for use in higher voltage systems).
Our REC BMS Q series with integrated CAN communication
RS – 485 communication:
Galvanically Isolated CAN:
|Dimensions||20 × 20 × 10 cm|
REC Wi-Fi module$209.00Add to cart
New Product, available April 2021
Wi-Fi module for REC BMS allows you to control your power on your favourite device using Wi-Fi network. Battery pack parameters such as voltages, current, temperatures, state of charge (SOC) and state of health (SOH) are displayed. It allows BMS settings and parameters setup, also used for BMS firmware updates. It fully substitutes PC Software BMS Master Control or BLE module. As an addition LCD touch display for REC BMS can also be used at the same time as an extension to the system design.
REC SI BMSFrom: $559.95Select options
The REC SI BMS has custom profiles that integrate on the RS485 network to several well known Solar Inverters.
- Sunny Island
During the day PV powers the house and charges the battery pack. If you’re not using all the electricity that the solar PV system is generating, then the system will ensure that any surplus energy is used to charge the battery pack. Once the battery is fully charged, if there is still more solar electricity being generated, this will be exported to the grid. At time of low solar generation (night or cloudy day) the solar PV panels have a reduced or zero output, but the battery system can discharge the stored electricity, providing you with renewable-generated electricity at no additional cost. Once the battery is discharged, if you need to use more electricity, you buy it from your electricity supplier.
REC Q Series BMS 16S Slave 12VFrom: $559.95Select options
Slave unit 12V+ REC BMS Q series with integrated CAN communication protocol can manage from 4 to 16 cells (in series) used where a redundant system with several packs is required, as part of a Master/Slave configuration network. It is also compatible with Victron Cerbo installations for integration in PV systems.