REC Q BMS Battery Temperature Sensor
Temperature sensor for use with REC Q series BMS units
Temperature sensor for use with REC Q series BMS units, complete with connector
|Dimensions||5 × 8 × 5 cm|
3kW DC-DC Energy Management System
$2,499.95Add to cart
• Charge higher voltage batteries utilizing existing chassis electrical system.
• On demand supplemental chassis electrical system power to support surge loads without
cost of additional batteries.
• Replace existing chassis alternator with higher energy unit and transparently support legacy
chassis power bus.
• J1939/RV-C based CAN support for system and BMS integration.
• Compatible with additional WS500 controlled alternators installed in same system
REC SI BMSFrom:
The REC SI BMS has custom profiles that integrate on the RS485 network to several well known Solar Inverters.
- Sunny Island
During the day PV powers the house and charges the battery pack. If you’re not using all the electricity that the solar PV system is generating, then the system will ensure that any surplus energy is used to charge the battery pack. Once the battery is fully charged, if there is still more solar electricity being generated, this will be exported to the grid. At time of low solar generation (night or cloudy day) the solar PV panels have a reduced or zero output, but the battery system can discharge the stored electricity, providing you with renewable-generated electricity at no additional cost. Once the battery is discharged, if you need to use more electricity, you buy it from your electricity supplier.
Tank Adapter YDTA-01
NMEA 2000 adaptor allows you to connect an existing resistive type fluid level sensor (EU, US, JP or custom) installed on a tank and display the fluid level on NMEA 2000 devices, including chart plotters and instrumental displays. The Adaptor can be configured to report one of the seven fluid types defined in the NMEA 2000 standard: Diesel Fuel, Gasoline Fuel, Oil, Fresh Water, Waste Water, Black Water (Sewage), or Live Well. Can be installed as a standalone measuring device or in parallel with an existing analog gauge or Volvo Penta MDI.