REC Precharge Delay
$69.95
Precharge Delay Module with 4s delay. 120VDC max. voltage
26 in stock (can be backordered)
|
New low Price! Pre-charge unit is a device that charges the input capacitors of the system components before the main contactor switches on. Pre-charge device eliminates high inrush currents at the switch-on of the contactor and prolongs the contactor lifespan dramatically. |
 |
|
| Weight | 0.1 kg |
|---|---|
| Dimensions | 15 × 15 × 7 cm |
Product Downloads
1 review for REC Precharge Delay
Related products
-
DS18B20 Additional REC BMS Temperature Sensor
$3.95Add to cartThe REC BMS is capable of supporting up to 8 Temperature Sensors. For the Q series you can purchase either a single (1D) sensor or the pre-wired 3D pack (3D). In addition you can parallel off additional temperature sensors. The REC BMS will simply read the address of the new DS as they announce themselves …
-
REC Victron CANBus Cable
$29.95Add to cartCAN DB9 to RJ45 (Victron Energy Pinout) This cable connects the REC CANBus to your Victron VE.Bus, allowing it to share data for load and charging control and allows BMS data to be displayed on your Victron network using devices like the Cerbo. As of July 1, 2021, the cable length has been increased to …
Recent forum posts
John E. (verified owner) –
I give it 4 stars, just because of the price. If you want a neat, simple, and easy to implement solution to prevent sparks when connecting your inverter, this is what you want. It will certainly help prolong your contactor life. It probably costs them less than $10 to manufacture, so the price is a bit much. It does what it says it will do, it does it reliably, and looks much neater than a low cost solution you can put together yourself, so I still recommend it.