REC Bi-Stable latch Driver
$59.95
12 in stock (can be backordered)
REC Bi-Stable Relay Driver (BSLRD) for bottom end switched relays
| Weight | 0.1 kg |
|---|---|
| Dimensions | 5 × 5 × 1 cm |
Related products
-
REC Wi-Fi module
$209.00Add to cartNew Product, available April 2021
Wi-Fi module for REC BMS allows you to control your power on your favourite device using Wi-Fi network. Battery pack parameters such as voltages, current, temperatures, state of charge (SOC) and state of health (SOH) are displayed. It allows BMS settings and parameters setup, also used for BMS firmware updates. It fully substitutes PC Software BMS Master Control or BLE module. As an addition LCD touch display for REC BMS can also be used at the same time as an extension to the system design.
-
DS18B20 Additional REC BMS Temperature Sensor
$3.95Add to cartThe REC BMS is capable of supporting up to 8 Temperature Sensors. For the Q series you can purchase either a single (1D) sensor or the pre-wired 3D pack (3D). In addition you can parallel off additional temperature sensors. The REC BMS will simply read the address of the new DS as they announce themselves …
-
REC Victron CANBus Cable
$29.95Add to cartCAN DB9 to RJ45 (Victron Energy Pinout) This cable connects the REC CANBus to your Victron VE.Bus, allowing it to share data for load and charging control and allows BMS data to be displayed on your Victron network using devices like the Cerbo. As of July 1, 2021, the cable length has been increased to …
Recent forum posts
Reviews
There are no reviews yet.