Engine Gateway YDEG-04
$189.00
Gateway for Volvo Penta, BRP Rotax, SmartCraft (Mercury, Mercruiser) and J1939 engines to NMEA 2000 marine electronics network. It will provide you with engine revolutions, motor hours, coolant temperature, battery voltage, warning and alarms, fuel rate and other data on the screen of your chart plotter. No extra cables required in most cases thanks to a built-in Y-connector.
Gateway for Volvo Penta, BRP Rotax, SmartCraft (Mercury, Mercruiser) and J1939 engines to NMEA 2000 marine electronics networks. It will provides you with engine revolutions, motor hours, coolant temperature, battery voltage, warning and alarms, fuel rate and other data on the screen of your chart plotter.
The Engine Gateway is compatible with BRP Rotax, Yanmar 4JH series, SmartCraft (Mercury, Mercruiser), J1939 engines (Caterpillar, etc.) and most Volvo Penta engines manufactured since 2004, and even with some engines manufactured before 2000.
Compatible Volvo Penta engines:
- with all versions of EVC-B, EVC-C, EVC-D, EVC-E (most modern engines manufactured since 2006);
- D1 and D2 series with MDI (Mechanical Diesel Interface), for example D2-40F;
- EDC III and EDC IV diesel engines (EMS 2.0, EMS 2.2);
- with EVC-A MC and EVC-A EC (also known as EVCmc and EVCec);
- EFI engines with MEFI4B ECU or later (gasoline, 2004-2005), with or without an EVC system installed;
- all EGC engines (gasoline, 2005 and Later), with or without an EVC system installed.
For J1708, J1587 and Volvo Penta KAD, EDC I and EDC II engines, please see our new J1708 Engine Gateway YDES-04.
On most vessels with Volvo Penta engines, all that you need is to plug the device into an empty socket of the NMEA 2000 network backbone and connect the engine cable to a Multilink hub or, using the built-in Y-connector on the engine cable of Gateway, to connect it in series with any of the EVC tachometers.
For some engines (please see section IV of manual for details) an adaptor cable is required, and we offer different adaptor cables (see the bottom of this page) for a reasonable price (available in the accessories section of the ordering page).
Factory settings are suitable for most of vessels with one or two engines. In case of two or more engines, one Gateway is enough if they are joined to a single network.
| Weight | 0.01 kg |
|---|---|
| Dimensions | N/A |
| Connector Type | NMEA2000, Raymarine NG |
Product Images
Product Downloads
Shipping-YD
Yacht Devices are shipped Free via Air Mail directly from the manufacturer in Europe. Expected delivery is 2-3 weeks from receipt of order. Duty and import costs, if applicable, are not included in the price.
Related products
-
Sale!
3kW DC-DC Energy Management System
$2,395.00Read more• Charge higher voltage batteries utilizing existing chassis electrical system.
• On demand supplemental chassis electrical system power to support surge loads without
cost of additional batteries.
• Replace existing chassis alternator with higher energy unit and transparently support legacy
chassis power bus.
• J1939/RV-C based CAN support for system and BMS integration.
• Compatible with additional WS500 controlled alternators installed in same system -
WIFI Gateway, Yacht Devices YDWG02
$189.95Select optionsIf you wish to see marine data from a smartphone, you should choose the Wi-Fi Gateway. It can join an existing Wi-Fi network on board or establish its own. It is also a bi-directional gateway, and can also convert NMEA 2000 to NMEA 0183 and vice versa for compatibility with outdated software. The Web Gauges page of the internal website allow viewing of realtime vessel data (position, depth, wind, course and speed, engine, etc.) using a web browser on PC, laptop, tablet or smartphone. This listing is for the item on the right that connects to your NMEA2000 network.
-
Barometer YDBC-05
$99.00Select optionsThe Barometer is intended for measuring atmospheric pressure within the range from 300 to 1100 hPa (mbar). The sensor is located inside the device case. Many chartplotters and digital navigation instruments are able to display data on pressure in the form of graphs or show a trend indicator; this allows tracking of trends in the weather change. The Device dimensions, including the connector, are 54x20x20mm, the mass is only 11 grams, so it is suitable for racing yachts. Pressure data output resolution 0.01 hPa (mbar), absolute measurement accuracy is ±1 hPa, relative measurement accuracy is ±0.12 hPa.
-
Exhaust Gas Sensor YDGS-01
$149.00Select optionsThe Sensor measures the temperature of extremely hot gases, solids and liquids within the range from 0 to +800 °C (+32 to 1472 °F). The Sensor can be configured by the user to display data as “Exhaust gas temperature”, “Air temperature”, “Heating system temperature”, “Engine room temperature”, etc. The Device is plug and play; you only need to plug it into a NMEA 2000 backbone to get readings on all chart plotters.
Recent forum posts
Reviews
There are no reviews yet.