Category: REC Cables and Harnesses

REC Cables and Harnesses

Showing all 10 results

REC Victron CANBus Cable
$29.95

CAN DB9 to RJ45 (Victron Energy Pinout) This cable connects the REC CANBus to your Victron VE.Bus, allowing it to share data for load and charging control and allows BMS data to be displayed on your Victron network using devices like the Cerbo. As of July 1, 2021, the cable length has been increased to …

REC Victron CANBus CableRead More

Add to cart
REC Active BMS Wiring Harness
$69.95

Complete wiring harness for ABMS connector: 5 wires for cells (l = 1 m) relays, digital output wires (l = 0.5 m) RS-485 cable with D-SUB9 M con. (l = 0.5 m) CAN cable with D-SUB9 F con. (l = 0.5 m) remote ON/OFF switch (l = 1 m)

Add to cart
REC Master Slave Interface DB9-RJ45 Adapter
$19.95

This new product from REC now allows you to use standard RJ45 Ethernet cabling to set up your Master/Slave RS485 Network (Ethernet cables purchased separately)

Add to cart
RJ45 Extension Coupler
$7.95

RJ45 Cable Extender

Add to cart
REC WS500 CANbus Adapter Cable
$34.95

The REC CANbus adapter cable allows you to connect the CANBus DB9 connector on your REC BMS to your WS500 CANBus Network directly, without the need for a Victron device. (Preliminary Image only)

Add to cart
REC Sunny SMA CANBus Cable
$29.95

CAN DB9 to RJ45 (Sunny SMA Energy Pinout) This cable connects the REC CANBus to your Sunny Island SMA inverter, allowing it to share data for load and charging control.

Add to cart
REC Master-Slave Cable
$24.95

This cable is used when you have multiple Q series BMS’s connected to a REC BMS MASTER UNIT 9M.

Add to cart
REC Master/Slave Cable -2M
$19.95

This cable has a special ground connection to Pin1 for use with the Master to the first slave. One per system is required. 6ft log (2M) CAT6 Use an RJ45 Coupler to extend it longer if needed

Add to cart
REC Master/Slave Cable -1M
$19.95

This cable has a special ground connection to Pin1 for use with the Master to the first slave. One per system is required. 3 ft log (1M) CAT6 Use an RJ45 Coupler to extend it longer if needed

Add to cart
REC CAN Termination Plug
$24.95

CAN Terminator (NON-Victron Energy Pinout). Us this terminator with a REC CANBus network which does not have a terminating EOL resistor at each end of the network.

Add to cart