Category: YD CANBus/NMEA2000
Showing 1–12 of 20 results
Barometer YDBC-05$99.00Select options
The Barometer is intended for measuring atmospheric pressure within the range from 300 to 1100 hPa (mbar). The sensor is located inside the device case. Many chartplotters and digital navigation instruments are able to display data on pressure in the form of graphs or show a trend indicator; this allows tracking of trends in the weather change. The Device dimensions, including the connector, are 54x20x20mm, the mass is only 11 grams, so it is suitable for racing yachts. Pressure data output resolution 0.01 hPa (mbar), absolute measurement accuracy is ±1 hPa, relative measurement accuracy is ±0.12 hPa.
NMEA 2000 Wi-Fi Router YDNR-02N$289.00Add to cart
Yacht Devices is pleased to present the most anticipated product of the season: NMEA 2000 Wi-Fi Router YDNR-02N, equipped with one NMEA 2000, two NMEA 0183, and one SeaTalk ports and Wi-Fi. It combines the best features of our NMEA 2000 Wi-Fi Gateway and NMEA 0183 Wi-Fi Router.
Engine Gateway YDEG-04$189.00Select options
Gateway for Volvo Penta, BRP Rotax, SmartCraft (Mercury, Mercruiser) and J1939 engines to NMEA 2000 marine electronics network. It will provide you with engine revolutions, motor hours, coolant temperature, battery voltage, warning and alarms, fuel rate and other data on the screen of your chart plotter. No extra cables required in most cases thanks to a built-in Y-connector.
Thermometer YDTC-13$99.00Select options
The Thermometer performs measurements within the range from -55 to +125°C (-67..+257°F), the sensor is placed outside the case on a flexible, 95cm wire in a sealed stainless steel sleeve and can be used to measure the temperature of gases or liquids. If necessary, the wire can be elongated up to 100 meters. The Thermometer can be configured by the user to display data as “Air temperature”, “Sea temperature”, “Temperature in the refrigerator”, “Temperature in the engine room”, “Bait Well Temperature”, etc.
NMEA 0183 Gateway YDNG-03$149.00Select options
Allows you to connect NMEA 0183 equipment to a NMEA 2000 network and vice versa. It has a bi-directional converter with wide support of message types including AIS. The configurable baud rate from 300 to 115200 baud for the NMEA 0183 port allows connection of AIS transceivers (38400 baud), fast NMEA 0183 multiplexers and PC adaptors, as well as standard NMEA 0183 equipment.
Humidity Sensor YDHS-01$149.00Select options
Provides chart plotters and instrumental displays with humidity and air temperature measurements and calculated dew point temperature. High quality sensor with ±2 % RH and ±0.3 °C accuracy in most of the operating range. The device is plug and play; you only need to plug it into a NMEA 2000 backbone to get readings on all chart plotters and instruments on board.
WIFI Gateway, Yacht Devices YDWG02$189.95Select options
If you wish to see marine data from a smartphone, you should choose the Wi-Fi Gateway. It can join an existing Wi-Fi network on board or establish its own. It is also a bi-directional gateway, and can also convert NMEA 2000 to NMEA 0183 and vice versa for compatibility with outdated software. The Web Gauges page of the internal website allow viewing of realtime vessel data (position, depth, wind, course and speed, engine, etc.) using a web browser on PC, laptop, tablet or smartphone. This listing is for the item on the right that connects to your NMEA2000 network.
Exhaust Gas Sensor YDGS-01$149.00Select options
The Sensor measures the temperature of extremely hot gases, solids and liquids within the range from 0 to +800 °C (+32 to 1472 °F). The Sensor can be configured by the user to display data as “Exhaust gas temperature”, “Air temperature”, “Heating system temperature”, “Engine room temperature”, etc. The Device is plug and play; you only need to plug it into a NMEA 2000 backbone to get readings on all chart plotters.
Tank Adapter YDTA-01$149.00Select options
NMEA 2000 adaptor allows you to connect an existing resistive type fluid level sensor (EU, US, JP or custom) installed on a tank and display the fluid level on NMEA 2000 devices, including chart plotters and instrumental displays. The Adaptor can be configured to report one of the seven fluid types defined in the NMEA 2000 standard: Diesel Fuel, Gasoline Fuel, Oil, Fresh Water, Waste Water, Black Water (Sewage), or Live Well. Can be installed as a standalone measuring device or in parallel with an existing analog gauge or Volvo Penta MDI.
3kW DC-DC Energy Management System
• Charge higher voltage batteries utilizing existing chassis electrical system.
• On demand supplemental chassis electrical system power to support surge loads without
cost of additional batteries.
• Replace existing chassis alternator with higher energy unit and transparently support legacy
chassis power bus.
• J1939/RV-C based CAN support for system and BMS integration.
• Compatible with additional WS500 controlled alternators installed in same system
NMEA 2000 Bridge YDNB-07$189.00Select options
Unifies two physical NMEA 2000 networks into a single logical network, smoothly exchanging messages between them. The Bridge also support filtering and processing of transmitted messages and contains a built-in compiler of a simple programming language. You can create message processing programs on any device with a MicroSD socket and a text editor. One of the CAN-interfaces on the device has high-voltage galvanic isolation and can operate at a higher supply voltage.